Control method of Intelligent Bubble Lamp in Smart Home
The use of smart light has the following three control
modes:
1, intelligent mobile device APP control use
2, only remote
control use
3, intelligent housekeeper + remote control need to download
APP assistance to use.
First, the use method of APP control of intelligent mobile devices.
1. Download the relevant APP with the smart
mobile device, log in to APP, enter the account number and password of
the smart butler, or click "scan" to directly scan the QR code behind
the smart butler. Or click the local connection directly.
2. turn on the power supply and the router, and
after the power supply and the network are connected, the intelligent
butler light will change from red to blue or green.
3. Press the allow access key (the big circle key
in the middle of the gateway), and the indicator light flashes
alternately in color.
4. Wait for a while, and the intelligent butler will automatically add all kinds of lighting products after being electrified.
5. Click to add new devices in APP, and the green
light of the intelligent housekeeper indicates that the lamps and
lanterns and other devices have been netted successfully, and the newly
added devices will be displayed on the APP.
6, withdraw from the network operation, delete
the lamp from the remote control or intelligent butler, and there is a
reset key on the back of the intelligent butler. After clicking, the
initial setting of the intelligent butler will be restored, and all the
devices that joined the intelligent butler will exit; or operate in APP.
Second, only use the remote control to control the use method.
When using the remote control for the first time, you need to code the relevant products for control, as follows:
Add lamps and lanterns to a group of remote controls.
Place the remote control close to the product
antenna (Note 1) 10CM, press and hold the group open button for a long
time (figure 2 gray), wait for the remote control indicator light to
flash 3 times, the lamp flash 3 times, the remote control indicator
light flash 5 times, and the lamp flash 2 times, indicating that the
group is successful.
Remove the fixture from the current group:
Press
the remote control close to the 10CM of the product antenna (Note 1),
press the group button (gray in figure 2) for 5 times in a row, wait for
the light to flash 2 times, and the current color of the lamp flashes 3
times, indicating that it has been deleted successfully from the
current group.
Remove the fixture from the remote control:
Put
the remote controller close to the product antenna (see Note 1) 10CM,
according to figure 3 this order of operation: 1 off, 2 on, 3 off, 4 on,
5 right button, waiting for the indicator light to flash twice, after 3
seconds, the current color of the lamp flashes white 3 times,
indicating that the related products have been reset successfully and
quit the remote control.
Third, intelligent butler + remote control use method (need to download APP to help use)
Add the remote control to the smart butler first, and before you join the smart butler, make sure:
1. All devices that code with the remote control have been deleted (use page 10 to delete the light).
2. The remote control has exited any other
intelligent butler (use this page to delete-the remote control has
exited the intelligent butler).
Add the remote control to the intelligent butler:
When the intelligent butler allows the equipment
to enter the network, press the full key of the remote control 5 times,
and the indicator light flashes 2 times. After 3 seconds, the indicator
light flashes 10 times in the process of entering the network,
indicating that the network is successful; turn on APP and create a new
one in the "grouping mode" option at the bottom. The first new area is associated with the first group of remote controls, and so on. The
first four groups of APP are associated with the four remote control
groups by default (adding lights, adding groups, deleting groups and
deleting lights are all done in APP).
The remote control exits the smart butler:
According
to figure 4, the operation is combined in this order: 1 on, 2 off, 3
on, 4 off, 5 left button, waiting for the indicator light to flash
twice, and after 3 seconds, the indicator flashes 5 times, indicating
that the remote control has been reset successfully and quit the
intelligent housekeeper.
2021 12/20